Car Audio Component Speakers: Available In Many Standad Sizes

Menachem Green — Sun, 18 Jul 2010 06:41:04 +0000

Since the automobile was created, there have been many inventors looking to improve their cars with their own work. The car-audio systems are just the same in that hobbyists have constructed a dizzying array of systems from car audio component speakers to systems requiring vans to carry.

Lining up a car stereo car audio system begins with the car stereo. You can find stereos that feature CD changers, fancy displays… or just a radio! Some systems are designed simply to be loud, and feature a high power output rating, but have a limited frequency range. Higher fidelity systems offer a wider frequency range with a smoother response, making it sound clearer and crisper. Essentially, if you like to listen to classical – loudly or not – you probably want a system that focuses on fidelity rather than volume… but classic rock simply needs to be played loud.

Majority of the car stereos available today in the market come with four component speaker outputs, which tend to increase with the increase in price. The output is measured by parameters called impedance and power rating, measured in ohms and watts respectively. It is not necessary to go into the basics of these parameters to make a good choice. One has to simply take care that the impedance on the car audio component speakers that one selects matches with that of the stereo output channel exactly and that the wattage of the speaker should be either equal to or greater than that of the stereo. The speakers can be damaged if the ouput wattage of the stereo exceeds that of the speaker.

A large number of consumers are satisfied with driving the speakers from the internal amplifier of the car stereo. However in case you desire a louder, higher-fidelity system, you should purchase a separate amplifier. This amplifier will be connected between your stereo, and amplifies the signal. This signal is then output to your speakers. By following this method, one should use the output specifications of the amplifier, instead of his stereo.

After you have outlined the specifications of the system you want, you must examine the layout of your car. Car audio component speakers come in many standard sizes – six inch diameter, for example – and unless you’re looking to do some serious modifications, you obviously need to order speakers of the proper dimensions! Amplifiers can be placed anywhere convenient, but keep in mind you will have to run wires to all the speakers, as well as the stereo.

After you have decide on this you would be ready to install your system. The installation varies greatly from car to car but one common thing is to ensure that the car is off and the battery is disconnected at the time of installation. The car and the stereo both have manuals outlining the procedure of installation, and it is finally upto ones determination to install the system. Last but not the least amplifier wires should not be visible inside the car as some people are put off at the sight of it.

Most basic stereos have four outputs for car audio component speakers. Be sure the impedance on your speakers matches the stereo output channel exactly, and that the speaker’s wattage is equal or greater. Car stereo car audio speakers come in various shapes and sizes, and you should order speakers of proper dimensions. Keep in mind that you will have to run wires to all the speakers and the stereo. Before installing your car-audio system, be sure your car is turned off, and the battery disconnected. A final piece of advice – don’t run amplifier wires inside the car cab. It makes people nervous.

- Menachem Green

SitePageTracker.com » car stereo car audio

Car Audio Component Speakers: Available In Many Standad Sizes